ControlSpec | SuperCollider 3.13.0 Help

Description

The original, and most common spec (see Spec). A ControlSpec is used by GUI sliders and knobs to specify the range and curve of the controls. ControlSpec may be used in many ways to map from linear 0..1 range to your desired range and back.

The most common way to create a ControlSpec is byanObject.asSpec // the object may be an array or a symbol

Class Methods

ControlSpec.new(minval: 0.0, maxval: 1.0, warp: 'lin', step: 0.0, default, units, grid)

Arguments:

minval	The minimum value of the range.
maxval	The maximium value of the range.
warp	a Warp, a symbol (e.g. \lin or \exponential: Default value is \lin), or something else that returns a Warp when sent the message .asWarp. A CurveWarp is defined by a number.
step	The smallest possible increment.
default	The default value.
units	The units, e.g. "hz". Used by some gui's as a unit label.
grid

Inherited class methods

Undocumented class methods

ControlSpec.newFrom(similar)

Instance Methods

.map(value)

Maps and constrains a value between 0 and 1 to the range between minval and maxval.

.unmap(value)

Maps and constrains a value between minval and maxval to the range between 0 and 1.g = ControlSpec(0.01, 2000, \exp, 0.1, 220, "Hz"); g.map(0.5); // convert from [0..1] to [0.01..2000] g.unmap(1000); // convert from [0.01..2000] to [0..1] // fore and back translation should be close to identical: g.unmap(g.map(0.5));

.clipLo

The lower of maxval and minval.

.clipHi

The higher of maxval and minval.

.constrain(value)

Returns value.asFloat.clip(clipLo, clipHi).round(step).

.range

Returns maxval - minval.

.guessNumberStep

Used for EZ GUI classes for guessing a sensible step if none is specified.

.gridClass

Returns the AbstractGridLines subclass corresponding to the current spec, in particular its warp behavior.

.grid

.grid = value

Get/set an instance of the AbstractGridLines subclass that describes the range and warp behavior of the current spec, e.g. for use by DrawGrid for drawing grids in Plotter.

Inherited instance methods

Undocumented instance methods

.blend(val1, val2, blend: 0.5)

From extension in /home/bgola/.local/share/SuperCollider/downloaded-quarks/JITLibExtensions/SystemOverwrites/extDictBlend.sc

.calcRange(data, defaultRange: 1.0)

.copy

.default

.default = value

.gridValues(n: 20, min, max, base: 10)

.hasZeroCrossing

.looseRange(data, defaultRange, minval, maxval)

.maxval

.maxval = v

.minval

.minval = v

.normalize(min, max)

.ratio

.roundRange(base: 10)

.setFrom(otherSpec)

.shift(amount: 1)

.step

.step = s

.units

.units = value

.warp

.warp = w

.zoom(ratio: 1)

Examples

// array is used as arguments to ControlSpec.new(minval, maxval, warp, step, default)
[300,3000,\exponential,100].asSpec.dump
Instance of ControlSpec {    (0313FC08, gc=00, fmt=00, flg=00, set=03)
  instance variables [6]
    minval : Integer 300
    maxval : Integer 3000
    warp : Symbol 'exponential'
    step : Integer 100
    default : Integer 300
}

// partially specified ...
[-48,48].asSpec.dump
Instance of ControlSpec {    (0313FF18, gc=00, fmt=00, flg=00, set=03)
  instance variables [6]
    minval : Integer -48
    maxval : Integer 48
    warp : Symbol 'linear'
    step : Float 0
    default : Integer -48
}

// a Symbol
\freq.asSpec.dump
Instance of ControlSpec {    (180F4910, gc=3C, fmt=00, flg=00, set=03)
  instance variables [8]
    minval : Integer 20
    maxval : Integer 20000
    warp : instance of ExponentialWarp (17FEDB30, size=1, set=1)
    step : Integer 0
    default : Integer 440
    units : " Hz"
    clipLo : Integer 20
    clipHi : Integer 20000
}

// nil becomes a default ControlSpec
nil.asSpec.dump
Instance of ControlSpec {    (0313FF18, gc=00, fmt=00, flg=00, set=03)
  instance variables [6]
    minval : Float 0
    maxval : Float 1
    warp : Symbol 'linear'
    step : Float 0
    default : Float 0
}

helpfile source: /usr/share/SuperCollider/HelpSource/Classes/ControlSpec.schelp
link::Classes/ControlSpec::

ControlSpec : Spec : Object